Sunday, 26 May 2013

Paipo

A few months ago i came across a really old longboard blank.

It was hideously brown and probably about 10' 2, but after a bit of a scratch with sandpaper i found that under the surface it was still nice and white. I had to cut it down to 9'4 to even get into our little flat, with the intention of making a low rocker log.

However, one night I impulsively took a saw to the middle and cut it, giving me a nice 5'2 blank and a not so nicely rockered 4'2. In hindsight if I knew I was going to chop it up I would have done that first and saved those precious 8 inches I initially sawed off!

Anyway, the 5'2 became the white mini simmons a few posts below, and I've had this 4'2 block of foam lying around for a while.

Luckily it was so thick that I could plane it flat, and then plane in a whole new rocker profile, and the end result is this little paipo for my son Mawgan. Dimensions are 4'2 x 22 x 2.75, so plenty of volume!


4'2 stand up paipo

It will have FCS plugs giving the option of going finless too.

Unfortunatly I'm not allowed to ride it until he does!

No comments:

Post a Comment